Nikon D7000 Body Only Digital SLR Cameras

Nikon D7000 DSLR marks a new era in creative flexibility. Packing high-end image technologies into a surprisingly portable body, Sturdy enough to travel anywhere and powerful enough to handle any situation, its range of advanced features will satisfy any photographer ready to further their skills. If photography is your passion, this is the D-SLR you need.

Nikon’s D7000 features a 16.2 MP DX-format CMOS sensor, 6 fps continuous shooting and breathtaking Full 1080p HD Movies with full time autofocus

  • 16.2 megapixel DX-format CMOS image sensor delivers lifelike images with vivid colors, reduced noise and smooth tonal gradations.
  • High ISO (100-6400) light sensitivity - manually extendable up to 25600 using the Hi2 setting. Enables faster shutter speeds for finely detailed images with minimal noise when you shoot fast-moving subjects or take pictures in low light. Features an Auto ISO setting.
  • EXPEED 2 image processing engine: optimizes the camera's technologies for superior performance and maximum image quality, all while consuming minimal energy.
  • Durable design: boasts tough, yet light, magnesium alloy top and rear covers, and environmentally-sealed joints that protect the camera from dust and moisture.
  • 100% viewfinder coverage with approx. 0.94x magnification for precise composition.
  • Durable shutter unit tested to 150,000 cycles. Delivers precise shutter control and exceptional reliability with a shutter speed of up to 1/8000s, and flash synchronization at up to 1/250s.
  • Twin SD memory card slots: for enhanced shooting flexibility. Use the second card when the first is full, or record stills on one and movies on another. SDXC compatible.
  • Razor-sharp 39-point Autofocus system with nine cross-type sensors in the center. Offers fast and precise autofocus coverage across the frame. Four AF-area modes, including 3D-tracking AF, deliver sharp results, whether your subject is off-center, moving fast or completely unpredictable.
  • 2,016 pixel RGB metering sensor delivers highly accurate metering for exact exposures and provides precise data to the camera's Scene Recognition System, which optimizes exposure, autofocus and white balance immediately before the shutter is released for sharply defined images.
  • 6 fps continuous shooting: capture fast-moving action at six frames per second.
  • Quick response: boasts a near-instant start-up time and approx. 0.052-second shutter-release time lag.
  • D-Movie – full HD (1920 x 1080) movie clips: a dedicated record button lets you capture beautiful high-definition (HD) movie clips instantly. AF-F mode keeps everything in focus while you are shooting and the camera supports use of an external microphone so you can record in quality stereo sound. Simple editing functions let you make edits of your clips in-camera.
  • Large 7.5 cm (3-in.), 920k-dot, high-resolution LCD monitor with reinforced glass makes it easy to view essential camera information, and a pleasure to review and edit your photos and movies.

Detailed specifications of the Nikon D7000 Digital SLR Camera

 

Type of camera

Single-lens reflex digital camera

Lens mount

Nikon F mount (with AF coupling and AF contacts)

Effective angle of view

Approx. 1.5 × lens focal length (Nikon DX format)

Effective pixels

16.2 million

Image sensor

23.6 x 15.6 mm CMOS sensor; total pixels: 16.9 million

Dust-reduction system

Image Sensor Cleaning, Image Dust Off reference data (optional Capture NX 2 software required)

Image size (pixels)

4,928 × 3,264 [L], 3,696 × 2,448 [M], 2,464 × 1,632 [S]

File format

NEF (RAW): 12 or 14 bit, lossless compressed or compressed. JPEG: JPEG-Baseline compliant with fine (approx. 1:4), normal (approx. 1:8) or basic (approx. 1:16) compression (Size priority); Optimal quality compression available. NEF (RAW) + JPEG: Single photograph recorded in both NEF (RAW) and JPEG formats

Picture Control System

Standard, Neutral, Vivid, Monochrome, Portrait, Landscape; selected Picture Control can be modified; storage for custom Picture Controls

Storage media

SD (Secure Digital), SDHC and SDXC memory cards

Double card slots

Slot 2 can be used for overflow or backup storage or for separate storage of copies created using NEF+JPEG; pictures can be copied between cards

File system

DCF (Design Rule for Camera File System) 2.0, DPOF (Digital Print Order Format), Exif 2.3 (Exchangeable Image File Format for Digital Still Cameras), PictBridge

Viewfinder

Eye-level pentaprism single-lens reflex viewfinder

Frame coverage

Approx. 100% horizontal and 100% vertical

Magnification

Approx. 0.94 x (50mm f/1.4 lens at infinity, -1.0 m-1)

Eyepoint

19.5 mm (-1.0 m-1)

Diopter adjustment

-3 to +1 m-1

Focusing screen

Type B BriteView Clear Matte screen Mark II with AF area brackets (framing grid can be displayed)

Reflex mirror

Quick return

Depth-of-field preview

Pressing depth-of-field preview button stops lens aperture down to value selected by user (A and M modes) or by camera (other modes)

Lens aperture

Instant return, electronically controlled

Compatible lenses

DX NIKKOR: All functions supported. Type G or D AF NIKKOR: All functions supported (PC Micro-NIKKOR does not support some functions); IX NIKKOR lenses not supported. Other AF NIKKOR: All functions supported except 3D color matrix metering II; lenses for F3AF not supported. AI-P NIKKOR: All functions supported except 3D color matrix metering II. Non-CPU: Can be used in modes A and M; color matrix metering and aperture value display supported if user provides lens data (AI lenses only); electronic rangefinder can be used if maximum aperture is f/5.6 or faster

Shutter

Electronically-controlled vertical-travel focal-plane shutter

Shutter speed

1/8,000 to 30 s in steps of 1/3 or 1/2 EV, bulb, time (requires optional Remote Control ML-L3), X250

Flash sync speed

X = 1/250 s; synchronizes with shutter at 1/320 s or slower (flash range drops at speeds between 1/250 and 1/320 s)

Release mode

S (single frame), CL (continuous low speed), CH (continuous high speed), Q (quiet shutterrelease), (self-timer), (remote control), MUP (mirror up)

Frame advance rate

1 to 5 fps (CL) or 6 fps (CH) (CIPA guidelines)

Self-timer

2 s, 5 s, 10 s, 20 s; 1–9 exposures at intervals of 0.5, 1, 2, or 3 s

Remote release mode

Delayed remote, quick-response remote, remote mirror-up

Exposure metering

TTL exposure metering using 2,016-pixel RGB sensor

Metering method

Matrix: 3D color matrix metering II (type G and D lenses); color matrix metering II (other CPU lenses); color matrix metering available with non-CPU lenses if user provides lens data. Center-weighted: Weight of 75% given to 8 mm circle in center of frame; diameter of circle can be changed to 6, 10 or 13 mm, or weighting can be based on average of entire frame (fixed at 8-mm when non-CPU lens is used). Spot: Meters 3.5 mm circle (about 2.5 % of frame) centered on selected focus point (on center focus point when non-CPU lens is used)

Metering range

Matrix or center-weighted metering: 0 to 20 EV. Spot metering: 2 to 20 EV (ISO 100 equivalent, f/1.4 lens, 20°C/68°F)

Exposure meter coupling

Combined CPU and AI

Exposure mode

Auto (auto; auto (flash off)), Scene (Portrait, Landscape, Child, Sports, Close up, Night portrait, Night landscape, Party/indoor, Beach/snow, Sunset, Dusk/dawn, Pet portrait, Candlelight, Blossom, Autumn colors, Food, Silhouette, High key, Low key), programmed auto with flexible program (P), shutter-priority auto (S), aperture-priority auto (A), manual (M), U1 (user settings 1), U2 (user settings 2)

Exposure compensation

-5 to +5 EV in increments of 1/3 or 1/2 EV

Exposure bracketing

2 to 3 frames in steps of 1/3, 1/2, 2/3 or 1 EV

Exposure lock

Luminosity locked at detected value with AE-L/AF-L button

ISO sensitivity

ISO 100 to 6400 in steps of 1/3 or 1/2 EV; can also be set to approx. 0.3, 0.5, 0.7, 1 or 2 EV (ISO 25600 equivalent) above ISO 6400; auto ISO sensitivity control available (Recommended Exposure Index)

Active D-Lighting

Auto, Extra high, High, Normal, Low or Off

ADL bracketing

2 frames using selected value for one frame or 3 frames using preset values for all frames

Autofocus

Nikon Multi-CAM 4800DX autofocus sensor module with TTL phase detection, finetuning, 39 focus points (including 9 cross-type sensors), and AF-assist illuminator (range approx. 0.5 to 3 m/1 ft. 8 in. to 9 ft. 10 in.)

Detection range

-1 to +19 EV (ISO 100 equivalent, 20°C /68°F)

Lens servo

Autofocus (AF): Single-servo AF (AF-S); continuous-servo AF (AF-C); auto AF-S/AF-C selection (AF-A); predictive focus tracking activated automatically according to subject status. Manual focus (M): Electronic rangefinder can be used

Focus point

Can be selected from 39 or 11 focus points

AF-area mode

Single-point AF; 9-, 21- or 39-point dynamic-area AF, 3D-tracking, auto-area AF

Focus lock

Focus can be locked by pressing shutter-release button halfway (Single-servo AF) or by pressing AE-L/AF-L button

Built-in flash

Auto flash with auto pop-up. Manual pop-up with button release

Guide Number

Approx. 39 /12, 39/12 with manual flash (ft./m, ISO 100, 68 F/20 C)

Flash control

TTL: i-TTL balanced fill-flash and standard i-TTL flash for digital SLR using 2,016-pixel RGB sensor are available with built-in flash and SB-900, SB-800, SB-700, SB-600 or SB-400 (i-TTL balanced fill-flash is available when matrix or center-weighted metering is selected). Auto aperture: Available with SB-900/SB-800 and CPU lens. Non-TTL auto: Supported flash units include SB-900, SB-800, SB-28, SB-27 and SB-22S. Distance priority manual: Available with SB-900, SB-800 and SB-700

Flash compensation

-3 to +1 EV in increments of 1/3 EV or 1/2 EV

Flash bracketing

2 to 3 frames in steps of 1/3, 1/2, 2/3 or 1 EV

Flash-ready indicator

Lights when built-in flash or optional flash unit such as SB-900, SB-800, SB-700, SB-600, SB-400, SB-80DX, SB-28DX or SB-50DX is fully charged; blinks for 3 s after flash is fired at full output

Accessory shoe